6" SYNTHETIC CLAY PAD - Clay Bar Alternative

6" SYNTHETIC CLAY PAD - Clay Bar Alternative

(No reviews yet) Write a Review


Maxshine Nano Clay Pad 6" (Mid Grade)

- Clay Bar Applicator, Single Synthetic Clay Bar Pad for DA Polisher and Rotary Polisher, Automotive Clay Bar Pad for Car Detailing, Clay Bars Auto Detailing

Maxshine 6"/150mm Clay Polishing Pad/Clay Bar Pad/Disc, Clay Pad Applicator, the brilliant long lasting material removes contaminants and impurities much faster than clay bars, long-lasting performance than traditional clay. It will achieve best results when use with clay lube and snow foam, durable, reusable. It can be used for many times, this clay pad is not water-soluble, therefore, just squeeze it after use. The contamination on the magic clay will come off naturally in water, then you can use it again. It could easily remove contaminants including paint overspray, water spots, fresh tree sap, rail dust, bird droppings, light oxidation and brake dust.


About this item

  • Stop Scratches Before They Start - Use our auto clay bar pad on your preferred polishing machine to remove build-up and particles that end up scratching your car. Remove contaminants in a single pass.
  • Wash It and Reuse It - Get long-lasting performance out of your synthetic clay bar pad. Unlike traditional clay bars these clay bar pads can be washed and reused up to 150 times.
  • A Faster Solution - Make it easy on yourself if you don't have time to traditionally clay bar your vehicle. Use a clay bar pad and get the job done in a fraction of the time.
  • Protect Your Cars Paint - Easily remove contaminants including paint overspray, water spots, fresh tree sap, rail dust, bird droppings, light oxidation, and brake dust
  • Fits on any 6" Backing Plate - Designed to work with Dual Action Polishers and Rotary Polishers. Pair up your automotive clay bar pad with Maxshine clay lube for optimal contamination removal.





This long lasting, 6" Nano pad will quickly remove paint over spray, water spots, tree, sap, rail dust, and other bonded surface contaminants from the surface of your automotive paint, glass, moldings, and plastic. Unlike a clay bar, The HD Nano Pad can be cleaned by simply rinsing off the accumulated contaminated with water. If you drop the pad on the ground, no worries. Just rinse with the Nano Pad and it is ready to use again. Attaches to any velcro 6" or smaller backing plate.

-Lasts 4 times longer than clay bars.

-Produces a flawless paint surface.

-Glides on & Off easily for a slick finish.

-If inadvertently dropped, simply rinse clean.


Use only on clean, cool paint and out of direct sunlight. Do not work on a surface over 144 degrees F. Please use in an inconspicuous space for the first time in case of unexpected adverse effects on painted surfaces.

1.Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficent 3D or HD clay lubricant evenly onto the suface.
3. Polish the surface with the HD Nano Pad using light pressure.
4. Wipe off residue and apply wax or glaze.
Note: Use 5.5" or 6" DA backing plate. Sufficient lubricant is crucial to the Nano Pad application. Plain water is not an adequate lubricant. DO NOT use with a rotary polisher. Nano Pad is not solvent resistant. Remove tar & grease before aplication.

Body Shop Directions:
1. Spray with silicone free lubricant. Apply 6" pad with Pneumatic finishing Sander at low speed and no pressure.
2. Sanding (Because the surface is free of contaminants, it becomes much easier to create even sanding marks for the next step paint correction).
3. Use HD Cut & Polish to level the clear coat.