(No reviews yet) Write a Review



PRIME is a clay lube on steroids. Revolutionary nano technology deep cleanses paint. The nano particles remove contamination inside the paint’s pores and leave behind an enhanced structure to boost the optimal bonding of a coating to a paint’s chemical structure.

PRIME is the second step in the FEYNLAB optimal bonding system. After using FEYNLAB® PURE WASH (step 1) to clean the surface, PRIME is used as the decontamination or ‘clay bar’ lubricant.

The name is born from its function. PRIME fills in the micro voids of the paint structure with nano particles for an enhanced surface for coatings to adhere to. This increased surface area and chemical bonding allows all FEYNLAB® coatings unrivalled adhesion to the painted surface. The result is optimal ceramic nano coating durability and performance.

Product Benefits:

  • True nano technology formula allows deep cleansing within the paint’s pores.
  • Prime lays down base chemistry within the porous paint structure, enhancing the bonding of ceramic coatings.
  • FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

1000ml of Concentrate

Dilution Ratio:
Mix to a 1:15 dilution. 1 part Concentrate to 15 parts Water.

Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness. Clean the surface with FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.

Apply liberally to panels in order to adequately lubricate the surface for a clay bar or decontamination mitt. After the physical decontamination is completed, simply wipe off any remaining product with a microfiber drying towel.

PRIME penetrates so deeply into the paint’s structure, a large amount will remain after a single stage polish, helping to promote optimal adhesion and performance of all FEYNLAB coatings.


*photo is not representative of actual product packaging*